HAMBENCH PRO · CABLE ATTENUATION AND SWR

Coax Loss Calculator

Estimate cable attenuation, SWR mismatch loss, and combined loss for an amateur radio feedline. Choose a cable, enter frequency in MHz, cable length in meters, and SWR to update the free on-screen results.

02

FEEDLINE LOSS

Coax Attenuation & SWR Loss

See cable attenuation, mismatch loss and their combined estimate.

All twelve cable choices and on-screen results are free for every visitor.

Cable attenuation0.94 dB
SWR mismatch loss0.18 dB
Combined loss1.11 dB

Source: Belden 8267 RG-213/U · Belden 8267 metric technical data; nominal attenuation for its RG-213/U cable.

Published source value at 100 MHz (6.2339 dB/100 m). 6.23 dB/100 m before cable-length scaling.

RG-213 reference points (10, dB/100 m)
  • 1 MHz (0.88587 dB/100 m)
  • 10 MHz (1.80455 dB/100 m)
  • 50 MHz (4.2653 dB/100 m)
  • 100 MHz (6.2339 dB/100 m)
  • 200 MHz (8.8587 dB/100 m)
  • 400 MHz (13.4521 dB/100 m)
  • 700 MHz (21.3265 dB/100 m)
  • 900 MHz (24.9356 dB/100 m)
  • 1000 MHz (26.248 dB/100 m)
  • 4000 MHz (70.5415 dB/100 m)
Sources for all cable choices

Calculations and on-screen results are free. Each printable result PDF costs $2, or is included at no extra cost with an active, paid HamBench Pro monthly subscription ($5/month).

Checking subscription status…

HAMBENCH PRO · $5 / MONTH

Save and load private station profiles.

Keep multiple station setups with every antenna, coax and battery input, then reopen a profile on any calculator page to refill its matching fields. Calculator use and result viewing stay free.

Checking HamBench Pro access…

Estimates are starting points for station planning; verify antenna tuning, actual feedline loss and battery performance in your setup.

Return to HamBench Pro

Compare coax cable loss for your station

This coax attenuation calculator reports cable loss, mismatch loss from SWR, and their combined loss in decibels. All twelve cable choices and the calculation remain free to use. Enter the frequency you plan to operate on and the length of feedline between your radio and antenna.

Available cables are RG-213, RG-58, LMR-400, RG-8X, RG-174, LMR-240, LMR-600, Belden H155, K-PO HF-5000, K-PO HF-2500, Ecoflex 10, and Aircell 7.

Published cable data and out-of-range estimates

When manufacturer data covers the selected frequency, use the result as a planning estimate for that cable reference. If manufacturer data does not cover the frequency, the calculator withholds cable attenuation and combined loss until you approve an extrapolated estimate. An approved out-of-range result is labeled as extrapolated so it is not confused with published cable data.

Real feedline loss varies with cable construction, connectors, temperature, condition, and installation. Use the calculated values as a comparison aid and check the specifications for the exact cable you plan to install.